Cab-1 Remote Controller Numeric Keypad Commands For Your Stationsounds Car - Lionel Union Pacific ALCo PA Owner's Manual

StationSounds operations
CAB-1 Remote Controller numeric keypad commands for your
StationSounds Car
W hen you press AUX1 on the CAB-1 Remote Controller, you turn the
numeric keypad into ten command buttons. The keypad lets you
control extra command features (until you press any top-row button like
SW, ACC, RTE, TR, or ENG). RailSounds sound system effects
in bold italic.
1 Raises the volume of the RailSounds
sound system. Sound volume
increases.
2 StationSounds announcement.
See the table on page 25.
3 Starts up the RailSounds sound
system.
4 Lowers the volume of the RailSounds
sound system. Sound volume
decreases.
Note!
Be sure that the light switch on the bottom of the car is set to ON to operate the
lights from the CAB-1 Remote Controller.
5 Turns off the RailSounds sound
system.
7 StationSounds announcement.
See the table on page 25.
8 Turn off the car lights.
9 Turn on the car lights.
29
AUX1