Technical Parameters; Basic Parameters - Advantech B+B SmartWorx SmartMotion ST355 User Manual

7. Technical Parameters

7.1 Basic parameters

SmartMotion Router
Temperature range
Cold start
Humidity
Altitude
Degree of protection
Supply voltage
Battery for RTC
Consumption
Dimensions
Weight
Antenna connectors
User interface
Operating -20 C to +60 C
Storage -40 C to +85 C
-15 C Data transfers via mobile network are available
immediately
-20 C Data transfers via mobile network are available
approximately in five minutes after the start of
the router. Everything else is functional imme-
diately.
Operating 0 to 95 % relative humidity non condensing
Storage 0 to 95 % relative humidity non condensing
Operating 2000 m / 70 kPa
IP30
10 to 60 V DC
CR1225
Idle 2.5 W
Average 4 W
Peak 11 W
Sleep mode 10 mW
55 x 97 x 125 mm (DIN 35 mm, EN 60715)
Metal box approximately 420 g (depends on the version)
5x SMA – 50
1x R-SMA – 50 Ohm (only for versions with
WiFi module!)
2x ETH Ethernet (10/100 Mbps)
USB USB 2.0
I/O 6-pin panel socket
Micro SD SDHC, SDXC
Table 18: Basic parameters
30
SmartMotion ST355