Understanding The Analysis Report - Quincy QGV-100 Instruction Manual

Section VI - Compressor Fluids

Understanding the Analysis Report

Reference page 49 for a copy of a blank
analysis report.
a) REPORT DATE - The date that the
fluid was analyzed.
b) REPORT NUMBER - The assigned
number to this report.
c) CUSTOMER ADDRESS - The name
and address of person that this report
is being mailed to. This information is
being taken from the sample bottle
as it is received.
d) CUSTOMER - The owner of the unit
that sample came from.
e) COMPRESSOR MANUFACTURER
- Brand of compressor sample taken
from.
f) FLUID TYPE - This should always be
one of the fluids listed in the 'Fluid
Specifications' on page 44.
g) SERIAL NUMBER - The unit serial
number of the Quincy compressor
the fluid sample was taken from.
h) MODEL NUMBER - The model
number of the Quincy compressor
that the fluid sample was taken from.
i) HOURS ON FLUID - These are the
actual hours that the QuinSyn fluid
has been in the unit since the last
fluid change.
48
j)
k) SAMPLE DATE - The date that
Items c) through k) are information
provided by the service person
supplying the fluid for analysis.
Incomplete or incorrect information
will affect the report's accuracy.
l)
m) PHYSICAL PROPERTIES RESULTS
n) SPECTROCHEMICAL ANALYSIS
Quincy Compressor-QGV Series
HOURS ON MACHINE - This is
the total hours on the compressor
hourmeter.
the sample was taken from the
compressor.
notiCe!
EVALUATION - This is a brief
statement made by the technician
performing the actual fluid analysis.
This statement addresses the
condition of the fluid and filter. This
statement will also note any problems
that need attention.
- Particle size is measured in microns.
See Fluid Parameters on pages 58-
59.
- See Fluid Parameters on pages 58-
59.