Control Panel - Quincy QGV-100 Instruction Manual

Section II - Description

Control Panel

QGV compressors are equipped with an
electronic control with a touch screen
control panel.
Once power is applied to the unit (after
going through several self test routines) the
touch screen (shown above) will indicate
0
the set point (target pressure), package
output pressure, discharge temperature,
operating mode, total hours of operation,
and the operating speed of the
compressor. A bar graph show the degree
of loading of the compressor. When the
bars match, the delivery pressure equals
the pressure set point.
Messages indicating service items that
need attention will appear on the touch
screen as they are tripped. The touch
screen menu also provides access to
various information and settings for the
compressor.
Only trained and knowledgeable service
personnel should alter the compressor
settings. Reference 'Section IV - Operating
Procedures' and 'Section V - Servicing' for
more information about QGV compressor
settings and menu options.
Quincy Compressor-QGV Series