Understanding The Analysis Report - Quincy QGB Series Instruction Manual

Understanding the Analysis Report

Reference the page 58 for a copy of a
blank analysis report.
a) REPORT DATE - The date that the
fluid was analyzed.
b) REPORT NUMBER - The assigned
number to this report.
c) CUSTOMER ADDRESS - The name
and address of person that this report
is being mailed to. This information
is being taken from the sample bottle
as it is received.
d) CUSTOMER - The owner of the unit
that sample came from.
e) COMPRESSOR MANUFACTURER
- Brand of compressor sample taken
from.
f) FLUID TYPE - This should always be
one of the fluids listed in the previous
section.
g) SERIAL NUMBER - The unit serial
number of the Quincy compressor
the fluid sample was taken from.
h) MODEL NUMBER - The model
number of the Quincy compressor
that the fluid sample was taken from.
i) HOURS ON FLUID - These are the
actual hours that the QuinSyn fluid
has been in the unit since the last
fluid change.
Section VII - Compressor Fluids
j) HOURS ON MACHINE - This is
the total hours on the compressor
hourmeter.
k) SAMPLE DATE - The date that
the sample was taken from the
compressor.
Items c) through k) are information
provided by the service person supplying
the fluid for analysis. Incomplete or
incorrect information will affect the
report's accuracy.
l) EVALUATION - This is a brief
statement made by the technician
performing the actual fluid analysis.
This statement addresses the
condition of the fluid and filter. This
statement will also note any problems
that need attention.
m) PHYSICAL PROPERTIES RESULTS
- Particle size is measured in microns.
See Fluid Parameters on pages 60-
6.
n) SPECTROCHEMICAL ANALYSIS - See
Fluid Parameters on pages 60-6.
Quincy Compressor-QGB
notiCe!
™
Back to Table of Contents
67