Table of Contents
Advertisement
Section III - Installation
• Receiving
• Moving the Unit to the Installation
Site
• Location
• Piping Connections
• Relief Valves
• Electrical
• Guards
• Manual Vent and Shutoff Valves
• Water and Sewer Facilities at the
Installation Site (Water-cooled
models only)
• Compressor Rotation
• Fan Rotation
Receiving
Upon receipt, immediately inspect the
compressor for any visible damage that
may have occurred during shipment. If
visible damage is found, the delivering
carrier should make a notation on the
freight bill and the customer should
request a damage report. If the shipment
is accepted and damage is found later,
it is classified as concealed damage.
Concealed damage should be reported
to the delivering carrier within 5 days
of delivery. The delivering carrier must
prepare a damage report. Itemized
supporting papers are essential to filing a
claim.
Read the compressor nameplate to be
sure the compressor is the model and size
ordered and that optionally ordered items
are included.
Check the reservoir and pressure relief
valves to be sure they are adequate for the
pressure at which you intend to operate.
2
Moving the Unit to the Installation Site
Forklift slots are provided in one side and
one end of the main frame. Use of chains
and slings should be limited to the main
frame. Do not attempt to lift the unit by
attaching to any components. Optional
lifting eyes are available.
Improper lifting may result in component,
system damage or personal injury.
Follow good shop practices and safety
procedures when moving the unit.
Removal or painting over safety labels
will result in uninformed conditions.
This could result in personal injury or
property damage. Warning signs and
labels shall be provided with enough
light to read, conspicuously located
and maintained for legibility.
not remove any warning, caution or
instructional material attached.
Quincy Compressor-QGV Series
Caution!
Warning!
Do
- Quick Links:
- Electrical System
Hide quick links:
Advertisement
Table of Contents
