Quincy QGB Series Instruction Manual page 26

Section IV - Operating Procedures
HOME:
Press the HOME button to return to
the main display from any screen.
Advanced Operations
ESC:
Use the ESC button to access the
control panel setup menus. These
menus allow adjusting the time clock
and other parameters that affect the
control panel operation.
From this screen, press ESC again to
access the internal menus. ENTER will
return to the main screen (HOME).
Once at this screen, use p, q and ENTER
to navigate through these menus. (ESC
will return to the previous menu.)
Use the OPERATOR MENU to set the
control panel clock and the display
language (English or Spanish).
22
Back to Table of Contents
LOG:
Press the LOG button, then p or q
to view a log of recent faults or
messages. This log records up to
eight messages/faults with the most
recent being  and the oldest 8.
Communication parameters are set in
the DIAGNOSTIC MENU, with respect to
the PLC. If the PLC of the control panel
is changed, the settings need to agree in
order for them to communicate.
Press ENTER to go to the DIAGNOSTIC
MENU, then ENTER again at TD 200
SETUP.
Press q, then ENTER to access the BAUD
RATE section.
Quincy Compressor-QGB
™