Advertisement
CRANKED ARM (FIG. H)
Use section A for grooving or sanding in the centre of
work pieces and in confined areas.
Use section B for curved surfaces.
STRAIGHT ARM (FIG. I)
Use the normal and narrow arm for general use for
slotting and for making joints.
HINTS FOR OPTIMUM USE
•
Always hold the tool with both hands.
•
Do not exert too much pressure on the tool.
•
Regularly check the condition of the sanding belt. Replace when necessary.
•
Always sand with the grain of the wood.
•
The work piece needs to be suitably supported or clamped.
•
When sanding new layers of paint before applying another layer, use extra fine grit.
•
On very uneven surfaces or when removing layers of paint, start with a coarse grit. On other sur-
faces start with medium grit. In both cases, gradually change to a fine grit for a smooth finish.
•
Consult your retailer for more information on available accessories.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
28
Seite
Advertisement
