Advertisement
Quick Links
Operation Manual
Drywall Sander
61857
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61857
Summary of Contents for WilTec 61857
- Page 1 Operation Manual Drywall Sander 61857 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 The drywall sander is connected to a dust collection bag which is operated via an absorption system does not require being connected to a vacuum cleaner. © by WilTec Wildanger Technik GmbH Item 61857 Page 3 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 № Name Aeration holes Step switch High-performance engine Switch Rotary disc Connection piece for dust bag Carbon brush 10 Side handle Handle 11 LED lamp Speed control © by WilTec Wildanger Technik GmbH Item 61857 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 If a dust bag can be connected, please ensure that it is connected and used adequately. The use of a dust bag can diminish the risk arising from dust particles. © by WilTec Wildanger Technik GmbH Item 61857 Page 5 http://www.WilTec.de...
- Page 6 Sanding discs 6× Carbon brushes 2× Extraction hose 2 m 1× Connection adapter 1× Hex key 1× Dust bag 1× © by WilTec Wildanger Technik GmbH Item 61857 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
-
Page 7: Installation
The sanding pad is pushed into the ad- hesive material. Do not use the drywall sander without attaching an adequate sanding sheet (this prevents damaging any work pieces). © by WilTec Wildanger Technik GmbH Item 61857 Page 7 http://www.WilTec.de http://www.aoyue.eu... - Page 8 If you do not use a dust bag which suitable for drywall dust, the amount of dust particles in the air will increase in the working area. Exposures of longer duration to increased amounts of dust in the atmosphere can affect the respiratory tract. © by WilTec Wildanger Technik GmbH Item 61857 Page 8 http://www.WilTec.de...
- Page 9 Attention: Do not touch sharp edges with the rotating sanding pad. Touching protruding items (nails, screws, distribution boxes, etc.) can damage the sanding disc. © by WilTec Wildanger Technik GmbH Item 61857 Page 9 http://www.WilTec.de http://www.aoyue.eu...
- Page 10 When you finish working with the sander, please hold it against the surface to allow it to ab - sorb any remaining dust particles for a few seconds longer. © by WilTec Wildanger Technik GmbH Item 61857 Page 10 http://www.WilTec.de...
- Page 11 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.