Advertisement
Quick Links
Operation Manual
Long-necked Drywall Sander
62531
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 62531
Summary of Contents for WilTec 62531
- Page 1 Operation Manual Long-necked Drywall Sander 62531 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Keep all small parts and packaging materials away from babies and children, as they pose a potential risk of suffocation. Parts overview № Name № Name Grinding disc Extension tube Grip Grinding medium © by WilTec Wildanger Technik GmbH Item 62531 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 4 Name 3-2 Locking button 3-3 Handwheel № Name № Name 4-2 Grinding disc 5-1 Brush segment 4-3 Vent 5-2 Turning circle 4-4 Screw 5-3 Exhaust regulator © by WilTec Wildanger Technik GmbH Item 62531 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 Idle speed (rpm) 800–1750 Diameter grinding discs (mm) Sandpaper 225 Pads 210 Grinding disc grit 80 / 100 / 120 / 150 / 180 / 240 © by WilTec Wildanger Technik GmbH Item 62531 Page 5 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 6 device to the mains or another power source. Carrying power tools with your finger on the switch or carrying power tools with the switch on will result in accidents. © by WilTec Wildanger Technik GmbH Item 62531 Page 6 http://www.WilTec.de...
- Page 7 Damaged accessories usually break through completely dur- ing this test run. © by WilTec Wildanger Technik GmbH Item 62531 Page 7 http://www.WilTec.de...
- Page 8 If explosive or self-igniting dust is produced during sanding, the processing instructions of the material manufacturer must be observed. © by WilTec Wildanger Technik GmbH Item 62531 Page 8 http://www.WilTec.de http://www.aoyue.eu...
- Page 9 (4-2) onto the sanding pad. The adhesive coating holds the grinding wheel securely in place. Make sure that the holes in the grinding wheels line up with the suction holes (4-3). Tear off the grinding disc when worn. © by WilTec Wildanger Technik GmbH Item 62531 Page 9 http://www.WilTec.de...
- Page 10 Check the power adapter and plug regularly. If one of the two is damaged, it must be replaced by a specialist. To ensure constant air circulation, always keep the ventilation slots in the motor housing clean and free from blockages. © by WilTec Wildanger Technik GmbH Item 62531 Page 10 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 11 Depending on the application, ma- chine wear and tear or your own personal workload can increase. Protect yourself and your machine by always using original accessories and original consumables. © by WilTec Wildanger Technik GmbH Item 62531 Page 11 http://www.WilTec.de...
- Page 12 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.