Advertisement
Quick Links
Operation Manual
Drywall Sander for Ceilings and Walls
61055
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61055
Summary of Contents for WilTec 61055
- Page 1 Operation Manual Drywall Sander for Ceilings and Walls 61055 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 • The sander is connected with a dust bag and could absorb dust by its self-absorption system, without connection with a vacuum cleaner. © by WilTec Wildanger Technik GmbH Item 61055 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 4 150–175 Length of telescopic handle (㎝) Net weight (㎏) Protection class Protection degree IP20 Illustrations № Name № Name Speed adjuster Foldable part Motor On/off switch © by WilTec Wildanger Technik GmbH Item 61055 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 • If the use of the power tool in a damp area is unavoidable, use a residual current device to reduce the risk of an electrical shock. © by WilTec Wildanger Technik GmbH Item 61055 Page 5 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 Special caution must be taken while sanding material containing lead: ◦ All persons working with the machine or entering the workspace must wear a special mask for protection from lead colours and steam. © by WilTec Wildanger Technik GmbH Item 61055 Page 6 http://www.WilTec.de...
- Page 7 The grinding surface adhesive disc has a layer of cloth so it can quickly and easily be in- stalled. The surface grinding sandpaper is pressed into the adhesive disc. Do not use the sander without a proper abrasive pad installed to prevent severe damage to the work. © by WilTec Wildanger Technik GmbH Item 61055 Page 7 http://www.WilTec.de...
- Page 8 Using a cross-tip screwdriver, unscrew the brush cover counter-clock- wise, remove the original carbon brush, put a new carbon brush to the brush holder and re-screw the brush cover. © by WilTec Wildanger Technik GmbH Item 61055 Page 8 http://www.WilTec.de...
- Page 9 Power tools produced by the company underlie a strict quality inspection. If the machine still fails, please never repair the machine by yourself without authorization of the customer service department. © by WilTec Wildanger Technik GmbH Item 61055 Page 9 http://www.WilTec.de...
- Page 10 This logo indicates that this electric equipment must not be disposed with the domestic waste. The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...