Advertisement
Quick Links
Operation Manual
Bench Polisher
62542
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificant-
ly.
Updating the documentation
Advertisement
Related Manuals for WilTec 62542
Summary of Contents for WilTec 62542
- Page 1 Operation Manual Bench Polisher 62542 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificant-...
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Handle the power cord carefully. Never carry devices by the power cord; Never pull the power plug out of the socket by the cable. Keep the power cord away from heat, oil, sharp ob- © by WilTec Wildanger Technik GmbH Item no. 62542 Page 3 http://www.WilTec.de...
- Page 4 The polishing machine is designed for polishing workpieces and other objects. The device is not in- tended for commercial use. No structural changes/ modifications are allowed. Structural changes or improper use can lead to property damage and personal injury. © by WilTec Wildanger Technik GmbH Item no. 62542 Page 4 http://www.WilTec.de...
- Page 5 2. Mark the locations for the holes through the pre-drilled holes in the device base. 3. Drill the holes at the points marked. 4. Secure the machine to the table with two long screws, washers, lock washers and nuts (not included). © by WilTec Wildanger Technik GmbH Item no. 62542 Page 5 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 3. Before each use, check that all moving parts are properly attached. Polishing pads that are too tight or too loose can cause injury and malfunction. 4. Replace the polishing pads if necessary. 5. Clean the machine regularly. © by WilTec Wildanger Technik GmbH Item no. 62542 Page 6 http://www.WilTec.de http://www.aoyue.eu...
-
Page 7: Disposal Regulations
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.