Advertisement
Quick Links
Operation Manual
Wraparound Tube Sander
ARTICLE 61966
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 1
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Related Manuals for WilTec 61966
Summary of Contents for WilTec 61966
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 1 http://www.WilTec.de http://www.aoyue.eu...
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
-
Page 3: Specified Use
Carry out a trial run: Allow the machine to run at idling speed for 30 seconds in a safe location. Stop immediately if significant vibrations occur or if other defects are noted. If such a situation occurs, check the machine to determine the cause. © by WilTec Wildanger Technik GmbH Seite 3 http://www.WilTec.de http://www.aoyue.eu... - Page 4 = Load speed = Dimensions of sanding band = Maximum Diameter of the tube = Speed of the tape = Weight = Sound power level = Sound pressure level = Vibration © by WilTec Wildanger Technik GmbH Seite 4 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 5 The angle of contact and the cutting output may be changed by the contact pressure. Keep the ma- chine in constant motion because otherwise recesses could be produced in the material. © by WilTec Wildanger Technik GmbH Seite 5 http://www.WilTec.de...
-
Page 6: Cleaning And Maintenance
- tain the tool and the accessories, keep the hands warm, organization of work pattems. © by WilTec Wildanger Technik GmbH Seite 6 http://www.WilTec.de http://www.aoyue.eu... - Page 7 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.