General Description
View Fig. 1 and Fig. 2 starting on page 7 for details
Design and specifications are subject to change without notice
The PRO Split System is a professional grade, American-manufactured, split two-piece climate control
unit designed specifically for the storage of wine at wine room temperatures. It is designed for easy
installation and operation. Wine Guardian PRO Split System uses 24 volt controls and R-134a
refrigerant. The entire PRO Split System fan coil and condensing unit sections are tested at the factory.
All components are of a high quality standard commercial grade. The entire system is approved by
ETL according to UL 1995 and CSA safety standards. All wiring complies with NEC. Each PRO Split
System fan coil section is furnished with a sealed, UL-approved power cord and plug.
The Wine Guardian PRO Split System Contains
1.
A Wine Guardian PRO Split System Fan Coil Unit with:
A thermal expansion valve to control the flow of refrigerant into the evaporator coil
A built-in condensate drain trap. No external trap is required.
A removable control panel for ease of service
Supply duct collar
Return duct collar
24 volt terminal strip for connection to standard thermostats/humidistats
2.
A Condensing Unit with:
A filer dryer to keep the refrigerant clean and free of contaminants
A sight glass to observe the level of refrigerant
A manual reset high pressure switch on the discharge to protect the compressor from high
pressures.
Auto reset low pressure switch
24-volt contactor for control of fan coil unit
Crankcase heater
Low ambient refrigeration controls
Outdoor enclosure
IMPORTANT
4