Table of Contents
Advertisement
Solution Systems Technologies Inc.
Board Level Hardware Description
1
Specifications
The specifications for the MVME197LE are listed in Table 1-1.
Characteristics
Power requirements
Operating temperature
Storage temperature
Relative humidity
Physical dimensions:
PC board
Height
Width
Thickness
PC board with connectors
and front panel
Height
Width
Thickness
Board connectors:
P1 connector
P2 connector
J1 connector
J2 connector
Block Diagram
Figure 1-1 is a general block diagram of the MVME197LE.
1-4
Solution Systems Technologies Inc.
720-565-5995 | info@solusys.com | www.solusys.com
Table 1-1. MVME197LE Specifications
+5 Vdc (+/- 2.5%), 4 A (typical), 5 A (maximum)
+12 Vdc (+/- 2.5%), 100 mA (maximum)
-12 Vdc (+/- 2.5%), 100 mA (maximum)
0° to 55° C at point of entry of forced air
(approximately 490 LFM)
-40° to 85° C
5% to 90% (non-condensing)
Double-high VMEboard
9.187 inches (233.35 mm)
6.299 inches (160.00 mm)
0.063 inch (1.60 mm)
10.309 inches (261.85 mm)
7.4 inches (188.00 mm)
0.80 inch (20.32 mm)
96-pin connector which provides the interface to the
VMEbus signals.
96-pin connector which provides the interface to the
extended VMEbus signals and other I/O signals.
20-pin connector which provides the interface to the remote
reset, abort, the LEDs, and three general purpose I/O
signals.
249-pin connector which provides the interface to the
MC88110 address, data, and control signals to and from the
mezzanine expansion.
720-565-5995 | info@solusys.com | www.solusys.com
Specifications
Installation Guide
Advertisement
Table of Contents
