Table of Contents
Advertisement
Solution Systems Technologies Inc.
ENV Parameter and Options
Memory Search Delay Address
Memory Size Enable [Y/N]
Memory Size Starting Address
MVME197LEIG/D1
Solution Systems Technologies Inc.
720-565-5995 | info@solusys.com | www.solusys.com
Table A-1. ENV Command Parameters (Continued)
720-565-5995 | info@solusys.com | www.solusys.com
Set Environment to Bug/Operating System
Default
Meaning of Default
FFFFD00F
The default address is
$FFFFD00F. This is the
MVME197LE GCSR
(global control and
status register) GPCSR5
as accessed through the
VMEbus A16 space and
assumes that the
MVME197LE GRPAD
(group address) and
BDAD (board address
within group) switches
are set to "ON". This
byte-wide value is
initialized to $FF by the
MVME197LE hardware
after a System or Power-
on Reset. In a multi-197
environment, where the
work pages of several
Bugs are to reside in the
memory of the primary
(first) MVME197LE, the
non-primary CPUs will
wait for the data at the
Memory Search Delay
Address to be set to $00,
$01, or $02 (refer to the
Memory Requirements
section in the Debugger
General Information
chapter of this guide for
the definition of these
values) before
attempting to locate
their work page in the
memory of the primary
CPU.
Y
Memory will be sized
for Self Test diagnostics.
00000000
The default Starting
Address is $0.
A
A-7
Advertisement
Table of Contents
