Breather Hose Installation - Parker 732 Series Owner's Manual

Bulletin HY25-1900-M1/US

Breather Hose Installation

Breather Hose Installation
When installing a breather hose assembly on a gear box or split shaft, the top of the vent assembly must be at least
12 inches above the unit as shown in (Fig. 1). (Fig. 2) shows an incorrect installation. When installing any vent
assembly, make sure it is in the upright position.
Owner's Manual
Legacy Split Shafts and Gear Box
Correct
304.8"
(12.00") MIN.
Fig. 1
Incorrect
14
Fig. 2
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA