Parker 732 Series Owner's Manual page 26

Bulletin HY25-1900-M1/US Bulletin HY25-1202-M1/US
Cable Control Installation
Cable Control Installation Instructions (Continued)
(Reversibles, dual shift units, and some gear boxes)
1. Use steps #1-#5 from previous instructions.
2. In step #6 the cable can come from either direction since the PTO will always be engaged when all the way in
or out.
3. Follow step #7 and #8.
4. In step #9 shift the PTO from forward to reverse or vice versa to determine the amount of travel needed and
the length of casing to be cut.
5. Follow step #10-#14.
6. Step #15 will show the folding:
CABLE IN: PTO ENGAGED: LIGHT ON [15A]
CABLE OUT (1st position): PTO DISENGAGED: LIGHT OUT [15B]
CABLE OUT (2nd position): PTO ENGAGED: LIGHT ON [15C]
15C
15B
15A
2
Owner's Manual
Legacy Split Shafts and Gear Box
Dash Wall or Optional Floor Location
1
328346-10X Wire Control Cable
Shift Assembly
22 Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA