Parker 732 Series Owner's Manual page 24

Bulletin HY25-1900-M1/US
Installation Instructions
Cable Control Installation Instructions* (Continued)
11. Push the wire back through and install the cable using the hardware from the previously mentioned wire
control parts bag (328380X).
12. Cut the excess wire after the cable casing and wire have been installed and tightened.
* All six bolt wire shifts with the exception of the reversible, dual shift units, and some gear boxes.
7
8
Owner's Manual
Legacy Split Shafts and Gear Box
9
20 Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA