Bulletin HY25-1900-M1/US
General Information
Shifting Procedures
Gear Box Operation
Vehicle Stationary
Before shifting the gear box into or out of gear, make sure the gears in the unit and input shaft have stopped
rotating.
Split Shaft Operation
Manual Transmission—Vehicle Stationary
Road mode to PTO mode:
1. Disengage the clutch and stop the vehicle.
2. Engage the parking brakes.
3. Shift the split shaft to PTO mode.
4. Select the desired transmission gear as required.
5. Engage the clutch.
6. Apply throttle as required.
PTO mode to road mode:
1. Disengage the clutch.
2. Shift the split shaft to road mode.
3. Disengage the parking brakes.
4. Resume normal driving procedures.
Automatic Transmission
Road mode to PTO mode:
1. Stop the vehicle.
2. Engage the parking brakes.
3. Shift the transmission into Neutral "N."
4. Shift the split shaft to PTO mode.
5. Shift the transmission into the desired drive range position.
6. Apply throttle as required.
PTO mode to road mode:
1. Shift the transmission into Neutral "N."
2. Shift the split shaft to road mode.
3. Release the parking brake.
4. Resume normal driving procedures.
CAUTION: Inadvertent shift may cause vehicle movement or unexpected engagement of PTO.
Owner's Manual
Legacy Split Shafts and Gear Box
5
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA