Racelogic VBOX Touch Quick Start Manual page 8

colour between green
the current location on track. The settings for this can be changed within the
Basic Screen:
• VBOX Touch will display the current live lap time and when a new lap starts, the previous lap time will be displayed
for 3 seconds before reverting to displaying the current live lap time. It is possible to just display the previous lap
time by Disabling the Rolling Lap
12. By default, VBOX Touch will automatically start recording when travelling over 0.5 km/h, this can be changed
within the General
13. Tapping on the SD Card Icon
will manually start or stop logging data, overriding the
14. The Record Icon
will show when the unit is logging data to the SD card.
If you have come to a stop, but the Record Icon is still on, press the SD Card Icon to stop the logging before
removing the card.
Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the
car is stationary. Always check the Record Icon before ejecting the card.
IMPORTANT – The SD card shouldn't be removed when the Record Icon is on as you may lose data.
Note: If for some reason the SD card is removed whilst still recording, it may need to be repaired using a PC
before it can be reused.
15. A screenshot of what is displayed on the screen can be taken at any time by pressing the
.
and red dependent on whether you are travelling faster or slower than the reference lap at
Time.
Settings.
when green
Configured Logging
https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Touch/
Delta-V Range settings.
Strategy.
Screenshot Button
8