Racelogic VBOX Touch Quick Start Manual page 7

.
Note: The first time that the unit is used, it may take up to 10 – 15 minutes to fully acquire satellites. After this, it
will usually take 1 – 2 minutes to acquire satellites.
9. Select the Settings Button
and navigate to the
multiple layouts are available, you can press the Select button to scroll through the different options. Ensure that
the correct circuit is selected!
10. Press the Exit Button
to return to the Lap Timing screen.
11. The unit is now ready to display live Lap Timing values.
Main Screen:
• Once the start/finish line is crossed, VBOX Touch will automatically begin to create a reference lap. When a
reference lap is being created, a 'Creating a Reference Lap' message is displayed within the Delta-T section and
the reference lap section will show a rolling lap time. The LEDs will also illuminate
process. The reference lap will update if a faster lap is achieved unless the
the Settings.
• Once a reference lap has been created, the unit presents a live difference in lap time (Delta-T) between the current
lap time and the stored and active reference lap at the current location on track.
• The 4 LEDs at the top of the screen provide a live reference lap speed comparison (Delta-V), varying in
Track Settings. The unit will display the currently selected track based on the GPS location. If
https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Touch/
blue during the creation
Reference Lap has been Fixed within
7