ADLINK Technology RTV Series User Manual page 89

EEPROM

Click Tool in the menu bar and select EEPROM to bring up
the EEPROM dialog box. Select the card you wish to
access, enter the offset and output values, and then click
the Write button to write the value into the EEPROM. Enter
the offset value and click the Read button to read the value
from the EEPROM. Valid offset values are between 0-127.
Valid output values are 0-255. The value in the EEPROM
will not be erased when the system is powered off.
Software Trigger

Click Tool in the menu bar and select Software Trigger to
bring up the Trigger dialog box. Select the card to access
and set the interval of the trigger pulse output. Check the
ports you want to trigger simultaneously, and click the Trig-
ger button. The one shot pulse output voltage goes high
(from 0V to 5V).
ViewCreatorPro Utility 79