Crtv Series - ADLINK Technology RTV Series User Manual

6. Anchor the board by replacing the screw.
7. Connect your video sources for image acquisition tests.
For details, refer to the 'ViewCreator Utility."
8. Turn on the computer. In some cases, when the com-
puter boots up, the "Plug and Play" feature of Windows
will detect the new PCI card 8 times (4 videos and 4
audios) and you will require drivers. For details, see the
"Installation Guide."

3.1.2 cRTV Series

Use the following steps to install the cRTV series board onto the
Compact PCI bus:
1. Remove the computer cover using the instructions from
the computer manual.
2. Check that there is an empty cPCI (32-bit/64-bit) slot to
accommodate the board. If is not an empty slot, remove
a cPCI board to make room for the cRTV-24 (3U) /
cRTV-44 (6U) board and take note of the chosen slot
number.
3. Remove the blank metal plate located at the front of the
selected slot (if present). Keep the removed screw to
fasten the cRTV-24 (3U) / cRTV-44 (6U) board.
4. Carefully position the cRTV-24 or cRTV-44 in the
selected cPCI slot as illustrated below.
44 Installation Guide