Pmc-Rtv Series - ADLINK Technology RTV Series User Manual

8. 8.Turn on the computer. In some cases, when the com-
puter boots up, the "Plug and Play" feature of Windows
will detect the new PCI card 8 times (4 videos and 4
audios) and you will require drivers. For details, see the
"Installation Guide."

3.1.3 PMC-RTV Series

The PMC socket may be integrated with the cPCI CPU board or
as a standalone system board for an embedded system. Use the
following steps to install the PMC-RTV series board onto the PMC
socket:
1. Remove the computer cover using the instructions from
the computer manual.
2. Check that there is an empty PMC (32-bit) socket to
accommodate the board. If there is not an empty slot,
remove a PMC board from your computer to make room.
3. Carefully position PMC-RTV21 onto the PMC socket.
4. Once perfectly aligned with an empty PMC socket, press
the board firmly but carefully into the connector.
5. Connect the video sources for image acquisition tests.
For details, refer to the 'ViewCreator Utility."
6. Turn on the computer. In some cases, when the com-
puter boots up, the "Plug and Play" feature of Windows
will detect the new PCI card 8 times (1 video and 1
audio) and you will require drivers. For details, see the
"Installation Guide."
Installation Guide 47