ADLINK Technology RTV Series User Manual page 142

Interval
Indicates the trigger output interval. The valid range is from 0 to
253. The definition is as follows:
0: 16 ms

32: 12 ms

128: 8 ms

253: 60μs

AngeloRTV_Sync_Grab.vi
Use this VI to obtain an image frame. Retrieve the memory start
address from the frame data, width, height, and size in bytes of the
image.
AngeloRTV_Get_Frame.vi
Retrieve the memory start address from the frame data, width,
height, and size in bytes of the image.
AngeloRTV_Copy_Frame.vi
Copy frame data to memory or an array that the user allocates.
Before using this VI, remember to allocate enough memory space
or array elements.
AngeloRTV_Set_GPIO_Sts.vi
There is one digital output channel in each port of RTV card. Use
this VI to set digital output status.
1.
AngeloRTV_Get_GPIO_Sts.vi
There is one digital input channel in each port of RTV card. Use
this VI to get the digital input status.
AngeloRTV_Write_EEPROM.vi
Write data into EEPROM. Data in EEPROM will not be lost when
power off.
132 Function Library