SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
Step 3 Align the mounting bracket holes with the drilled holes, insert expansion bolts into the holes
through the mounting bracket, and then tighten the expansion bolts.
Figure 4-15 Securing a mounting bracket
----End
4.5 Installing the SUN2000
Installation Precautions
Before installing the SUN2000, take it out from the packing case and move it to the
installation position.
Issue 03 (2019-07-30)
To prevent dust inhalation or contact with eyes, wear safety goggles and an anti-dust
respirator when drilling holes.
Clean up any dust in and around the holes using a vacuum cleaner and measure the
distance between holes. If the holes are inaccurately positioned, drill a new set of holes.
Level the head of the expansion sleeve with the concrete wall after removing the bolt,
spring washer, and flat washer. Otherwise, the mounting bracket will not be securely
installed on the concrete wall.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
27