Huawei SUN2000-50KTL-M0 User Manual page 93

SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
Figure 7-7 Feature parameters (special user)
----End
Parameter List
Parameter
Communication
interrupt shutdown
Communication
resumed startup
Communication
interruption duration
(min)
Soft start time (s)
Issue 03 (2019-07-30)
Description
The standards of certain countries and
regions require that the inverter must shut
down after the communication is interrupted
for a certain time.
If this parameter is set to Enable, the
inverter automatically starts after
communication recovers. If this parameter is
set to Disable, the inverter needs to be
started manually after communication
recovers.
Specifies the duration for determining
communication interruption. Used for
automatic shutdown for protection in case of
communication interruption.
Specifies the duration for the power to
gradually increase when the inverter starts.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Remarks
If Communication interrupt
shutdown is set to Enable and the
inverter communication is interrupted
for a specified time (set by
Communication interruption
duration), the inverter will
automatically shut down.
This parameter is displayed when
Communication interrupt
shutdown is set to Enable.
N/A
N/A
87