Huawei SUN2000-50KTL-M0 User Manual page 73

SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
Procedure
Step 1 Turn on the AC switch between the SUN2000 and the power grid.
If you perform
You can start the SUN2000 only after the fault is automatically rectified.
Step 2 Turn on the DC switch at the bottom of the SUN2000.
Step 3 Connect a mobile phone that runs the SUN2000 app to the inverter using a Bluetooth module,
a WLAN module, or a USB data cable.
Figure 6-1 Connection mode
Issue 03 (2019-07-30)
Step 2 before
 Purchase a Bluetooth module or a WLAN module bundled with the inverter. A Bluetooth module or
a WLAN module purchased from any other source may not support communication between the
inverter and the SUN2000 app.

Use the USB data cable delivered with the mobile phone. The port type is USB 2.0.
 The screen snapshots in this document correspond to app 3.2.00.001 (Android).
Copyright © Huawei Technologies Co., Ltd.
Step 1, the SUN2000 reports a fault about abnormal shutdown.
6 Commissioning
67