Huawei SUN2000-50KTL-M0 User Manual page 46

SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
1. Select appropriate rubber fittings based on the outer diameter of the AC power cable to
ensure proper sealing.
2. There are two types of waterproof connectors for the AC OUTPUT port. The dimensions
depend on the SUN2000 that is used.
3. To avoid damaging the rubber fitting, do not route a cable with a crimped OT terminal
directly through the rubber fitting.
4. Adjusting a cable when the thread-lock sealing nut is tightened will shift the rubber fitting,
which will affect the Ingress Protection Rating of the device.
Figure 5-8 Routing a cable
Step 3 Remove an appropriate length of the jacket and insulation layer from the AC output power
cable using a wire stripper.
Ensure that the jacket is in the maintenance compartment.
Issue 03 (2019-07-30) Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
40