SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
7.2 Operations with the SUN2000 App
When you use the SUN2000 app to set parameters for the SUN2000, setting items on certain
parameter setting screens are not displayed if the AC switch between the SUN2000 and the
power grid is turned on but both of DC SWITCH on the SUN2000 are not in the ON position.
Switch both of DC SWITCH to the ON position and then reset relevant parameters again.
7.2.1 Operations Related to the Advanced User
If you log in to the app as Advanced User, you can set grid parameters, protection parameters,
and feature parameters for the SUN2000.
7.2.1.1 Setting Grid Parameters
Procedure
Step 1 Tap Function Menu > Settings > Grid Parameters to access the parameters setting screen.
Figure 7-2 Grid parameters (advanced user)
----End
Parameter List
Parameter
Grid code
Isolation
Issue 03 (2019-07-30)
The app screenshots in this chapter are for the SUN2000-70KTL-INM0.
Configurable parameters vary depending on the grid code. The actual display prevails.
The parameter names, value ranges, and default values are subject to change. The actual display
prevails.
Description
Set this parameter based on the grid code of the country or region
where the SUN2000 is used and the SUN2000 application scenario.
Specifies the working mode of the SUN2000 according to the
grounding status at the DC side and the connection status to the grid.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
78