SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
1.
2.
Cable Specifications
Cable Type
PV cable that meets the 1100 V
standard
Cables with high rigidity, such as armored cables, are not recommended, because poor contact
may be caused by the bending of the cables.
Procedure
Step 1 Prepare positive and negative connectors.
Use the Amphenol Helios H4 PV connectors supplied with the SUN2000. If the PV
connectors are lost or damaged, purchase the connectors of the same model. The device
damage caused by incompatible PV connectors is not covered under any warranty.
Issue 03 (2019-07-30)
Evenly distribute DC input power cables on the DC input terminals controlled by the two
DC switches.
Maximize the number of connected MPPT circuits.
Copyright © Huawei Technologies Co., Ltd.
Conductor
Cross-Sectional Area
(mm
)
2
4.0–6.0 (12–10 AWG)
5 Electrical Connections
Cable Outer Diameter
(mm)
4.5–7.8
47