Huawei SUN2000-50KTL-M0 User Manual page 108

SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
Item
Number of MPP trackers
Note a: The maximum input voltage is the upper threshold of the DC voltage. If the input
voltage exceeds the threshold, the solar inverter may be damaged.
Note b: If the input voltage is beyond the operating voltage range, the solar inverter cannot
work properly.
Output
Item
Rated active power
Maximum apparent power
Maximum active power
(cosφ = 1)
Rated output voltage
Rated output current
Adapted grid frequency
Maximum output current
Power factor
Maximum total harmonic
distortion (rated power)
Note a: The rated output voltage of the SUN2000-50KTL-M0 is determined by Grid code,
which can be set on the SUN2000 app, SmartLogger, or NetEco.
Note b: Choose whether to connect the neutral wire to the SUN2000-50KTL-M0 based on
the application scenario. When it is used in the scenarios without neutral wires, set Output
mode to Three-phase, three-wire. When it is used in the scenarios with neutral wires, set
Output mode to Three-phase, four-wire.
For the SUN2000 that supports built-in PID repair, when Built-in PID running mode is set
to Repair, there is repair voltage between PV modules and the ground at night. If you need to
maintain PV modules at night, power off the SUN2000 to avoid electric shocks.
Issue 03 (2019-07-30)
SUN2000-70KTL-INM0
6
SUN2000-70KTL-INM0
65 kW
72 kVA
72 kW
a
288 V/500 V, 3W+PE
75.1 A
50 Hz
83.2 A
0.8 leading... 0.8 lagging
< 3%
Copyright © Huawei Technologies Co., Ltd.
10 Technical Specifications
SUN2000-50KTL-M0
SUN2000-50KTL-M0
50 kW
55 kVA
55kW
220V/380V, 230V/400V,
b
240V/415V, 3W+(N )+PE
76 A@380 V, 72.2 A@400
V, 69.6 A@415 V
50 Hz/60 Hz
83.6 A@380 V, 79.4
A@400 V, 76.6 A@415 V
102