Huawei SUN2000-50KTL-M0 User Manual page 96

SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
Parameter
Added Apparent power
baseline (Smax) (kVA)
Added Active power
baseline (Pmax) (kW)
Shutdown at 0% power
limit
Plant active power
gradient (min/100%)
Filter duration for
average active power
(ms)
Active power change
gradient (%/s)
Fixed active power
derated (kW)
Active power
percentage derating (%)
Reactive power change
gradient (%/s)
Power factor
Reactive power
compensation (Q/S)
Reactive power output
at night
Enable reactive power
parameters at night
Issue 03 (2019-07-30)
Description
Adjusts the apparent output baseline of the
inverter.
Adjusts the active output baseline of the
inverter.
If this parameter is set to Enable, the
SUN2000 shuts down after receiving the 0%
power limit command. If this parameter is
set to Disable, the SUN2000 does not shut
down after receiving the 0% power limit
command.
Specifies the rate of active power rise due to
sunlight changes.
Specifies the period of active power rise due
to sunlight changes. This parameter is used
with Plant active power gradient.
Adjusts the change speed of the SUN2000
active power.
Adjusts the active power output of the
SUN2000 to a fixed value.
Adjusts the active power output of the
SUN2000 to a percentage.
Specifies the change speed of the inverter
reactive power.
Adjusts the SUN2000 power factor.
Adjusts the SUN2000 output reactive
power.
In some specific application scenarios, a
power grid company requires that the
inverter can perform reactive power
compensation at night to ensure that the
power factor of the local power grid meets
requirements.
When this parameter is set to Enable, the
inverter outputs reactive power based on the
setting of Reactive power compensation at
night. Otherwise, the inverter executes the
remote scheduling command.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Remarks
N/A
N/A
N/A
N/A
N/A
Adjust the active power based on the
percentage of the rated apparent
power.
Pmax_limit: upper threshold for the
active power output
If this parameter is set to 100, the
SUN2000 delivers power output
based on the maximum output
power.
N/A
N/A
N/A
This parameter is displayed when
Isolation is set to Input
ungrounded, with TF.
This parameter is displayed when
Reactive power output at night is
set to Enable.
90