Zone To Zone Cloning - Motorola SRX 2200 Model 3.5 User Manual

Zone to Zone Cloning

Zone to Zone Cloning clones conventional zones from one
radio to another. This feature allows you to select the clone
enabled zones from a source radio and clone them into a
target radio.
You can clone the zones by using a cable that connects the
source and target radios.
Connect two radios with a clone cable. The target radio
must be digital, band, and FCC mandate compatible with
the source radio.
1 On the source radio, press the Menu Select button
directly below Clon.
2 Press the Menu Select button directly below Sel to
select source zone.
3 When connecting to the target radio, one of the
following scenarios occurs:
• If the radio is compatible, the radio displays
Target radio connected. Proceed to
• If the radio is not compatible, the radio displays
Target radio incompatible. Press the Menu
Select button directly below Ok and the radio
returns to the previous screen.
Once connected, the zone clone status is displayed
on the right.
4 Press the Menu Select button directly below Next to
accept the source zones selection. One of the
following scenarios occurs:
• If you select a single source zone, press the
Menu Select button directly below Sel to select
the target zones for cloning.
• If you select multi-source zones, the radio
displays Confirm target and shows the
automatically selected target zones and source
zones mapping.
• If the selected multi-source zones exceed the last
clonable target zone, the radio displays <#> src
zones unselected and Sel exceed max tgt
zone alternatively.
step 4.
English
93