Chapter 1: General Radio Operation; Selecting A Zone - Motorola SRX 2200 Model 3.5 User Manual

General Radio Operation
This chapter explains the general radio operations in your
radio.

Selecting a Zone

Your radio must be preprogrammed for you to use this
feature.
A zone is a group of channels. Do one of the following to
select a radio channel. You can use these options
interchangeably depending on your preference and the
programmed functions.
• Select a zone using the preprogrammed Zone (3-
Position A/B/C) switch:
a. Move the preprogrammed Zone (3-Position
A/B/C) switch to the position of the required
zone.
If the zone number entered is unprogrammed, the
display shows Invalid entry. Repeat this step.
b. Press the PTT button to transmit on the displayed
zone channel.
• Select a zone using the radio menu Zone:
a. or to Zone and press the Menu Select button
directly below Zone.
b. or to the required zone, or use the keypad
to enter the zone number.
If the zone number entered is unprogrammed, the
display shows Invalid entry. Repeat this step.
c. Press the Menu Select button directly below Sel
to confirm the displayed zone.
d. Press the PTT button to transmit on the displayed
zone channel.
• Select a zone using the radio menu ZnUp or ZnDn:
a. or to ZnUp or ZnDn.
b. Press and hold the Menu Select button directly
below ZnUp or ZnDn until the required zone
appears.
Positions of ZnUp and ZnDn on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
c. Press the PTT button to transmit on the displayed
zone channel.
English
73