Radio Kill; Using Remote Kill To Kill Another Radio - Motorola SRX 2200 Model 3.5 User Manual

English
5 Perform one of the following actions:
• or to the required ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• Use the keypad to enter the required ID.
• Press the Menu Select button directly below
Send to initiate command.
If the receiving radio does not have encryption key to
decrypt the received command, your radio display
shows Ack received.
If the receiving radio does not have encryption key to
decrypt the received encrypted command, your radio
display shows Decrypt failed.
If the receiving radio is powered off or already killed,
your radio display shows No Acknowledgment.
Once the receiving radio received the command, its screen
locked and request for password.
NOTICE:
To un-stun a radio, follow the procedure in
Unlocking Your Radio on page
152

Radio Kill

This feature allows you to render your radio or another
radio inoperable if the radio is misplaced or lost. When a
radio is killed, the display turns blank and all functions of
the radio are not usable.
The killed radio can only be recovered from KILL with a
special device. Consult an authorized and qualified
technician for details.

Using Remote Kill to Kill Another Radio

Remote Kill allows you to render another radio inoperable
by sending an over the air command using the menu on
your radio.
148.
1
or to Kill.
2 Press the Menu Select button directly below Kill.
The display shows Enter Password.
3 Use the keypad to enter your Tactical Inhibit Encode
Password.