Voice Announcement - Motorola SRX 2200 Model 3.5 User Manual

English
NOTICE:
The radio cannot be used while the upgrade is
being installed. Therefore, make sure to only
accept the upgrade at a convenient time when
immediate radio use is not required.
• If you choose to delay, a configuration data upgrade is
installed automatically at the next power up. However, in
the case of a firmware upgrade, the radio prompts
Upgrade? again at the next power up.
• If you choose to reject, the display shows Upg Aborted.
The radio continues to function with the current
configuration until it gets reprogrammed.
NOTICE:
If your radio has problems upgrading over-the-air,
consult a qualified technician for details.

Voice Announcement

This feature enables the radio to audibly indicate the
current feature mode, zone or channel the user has just
assigned. This audio indicator can be customized per
customer requirements. This is typically useful when the
user is having difficulty reading the content shown on the
display.
188
Each voice announcement is within a limit of three seconds
maximum. The sum duration of all different voice
announcements in a radio shall be no more than 1000
seconds.
NOTICE:
This feature must be preprogrammed by a qualified
radio technician.
Check with your agent if Voice Announcement is
available for the feature you need.
The two options of priority for the Voice Announcement
available are:
High
Enables the voice of the feature to announce even
when the radio is receiving calls.
Low
Disables the voice of the feature from announcing when
the radio is receiving calls.
You hear a voice announcement when the features below
are preprogrammed in the radio.
• The radio powers up. The radio announces the current
zone and channel it is transmitting.
• Press the preprogrammed voice announcement button
(which specifically programmed to playback the current