Bluetooth Drop Timer - Motorola SRX 2200 Model 3.5 User Manual

English
Re-Pair Tim- Re-Pair Timer Scenarios
er Options
riod of time depending upon the
Drop Timer value. If the device
fails to reconnect within the period,
the accessory then powers off.

Bluetooth Drop Timer

The Bluetooth Drop Timer has two different settings and
functions, depending upon the selection of the Re-Pair
Timer.
Re-Pair Timer Description
Options
Immediate 0–15 minutes programmable buffer
(For MCW Ac- time to re-establish the Bluetooth
cessories on- Connection when the Bluetooth sig-
ly) nal is out of range.
If either device powers off, the pair-
ing keys are immediately cleared
from both devices and the devices
must re-pair.
172
Re-Pair Timer Description
Options
Infinite (For all This Timer only applies to the acces-
Bluetooth de- sory. The programmable timer
vices) choices are: 0–15 minutes, 2 hours,
4 hours, or 8 hours.
Do note there are exceptions for Op-
eration Critical Wireless (OCW)
headset and PTT which are preprog-
rammed to 8 hours.
This timer is a "stay alive" timer
where the accessory remains on
without the device reconnecting be-
fore powering off. The radio remains
on until the user powers off the ra-
dio. The radio and accessory re-
mains paired indefinitely. Once the
device re-connect, the timer is reset.
The radio could not control the Drop Timer of Personal
Area Networking (PAN), Dial-Up Networking (DUN),
Commercial Off- The-Shelf (COTS), and data services. It
depends on the specifications of these external devices.
Check with your dealer or system administrator for more
information about these timers.