Sending A Query - Motorola SRX 2200 Model 3.5 User Manual

English

Sending a Query

This feature is available for radio users who have
successfully logged in with the Two-Factor Authentication.
Query is a special form of Quick Text marked with a flag
that is replied or dispatched in normal TMS message. The
query template needs to be configured in the quick test list
of the CPS. You can choose from the quick text list,
including queries if present.
You shall receive a service advertisement message to
indicate the Query is available after you have successfully
logged in the radio with a Two-Factor Authentication.
NOTICE:
The query server must be selected as the
destination so that it can receive the query message
and respond the query with text message. The
query server must be an entry in the data user list in
the CPS.
1 Perform one of the following actions:
• To access this feature using the preprogrammed
button, press the preprogrammed TMS Query
button and proceed to
• To access this feature using the menu, proceed
to the next step.
140
step 5.
2
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
• or to Compose and press the Menu Select
button directly below Sel.
• Press the Menu Select button directly below
Exit to return to the Home screen.
4 or to Query and press the Menu Select button
directly below Sel for a predefined message.
5 or to scroll through the list of messages and
press the Menu Select button directly below Sel to
select the required message.
The message appears on the Compose screen, with
a blinking cursor at the end of it.
6 Use the keypad to edit the message, if required.
7 Press the Menu Select button directly below Optn.