Selecting The Audio Speaker - Motorola SRX 2200 Model 3.5 User Manual

English

Selecting the Audio Speaker

Your radio must be preprogrammed to allow you to use this
feature.
This feature allows you to select the speaker route for the
radio's audio from either the main or the secondary speaker
using the radio profile settings. While both speakers
function together with the secondary speaker enhancing
intelligibility of the received audio during typical radio
operation, each speaker has an independently-tuned
frequency response and volume level operation.
The secondary speaker also has a "whisper" mode with a
modified volume taper for quieter modes of operation.
NOTICE:
If an external speaker or microphone accessory is
attached to the radio, neither internal speaker is
operational as audio is routed to the accessory.
Do one of the following to select the audio speaker. You
can use the options interchangeably depending on your
preference and the programmed functions.
• Select the audio speaker using the preprogrammed
Profile button:
a. Press the preprogrammed Profile button.
b. or to scroll through the menu selections.
202
c. Press the Menu Select button directly below Sel
to select the radio profile with the required
speaker routing or press the Menu Select button
directly below Exit to exit the screen without
making any changes.
The radio returns to the Home screen. The profile
name on the Home screen indicates the current
selected radio profile.
• Select the audio speaker using the radio menu Prfl:
a. or to Prfl.
b. To access the Profiles feature screen, press
the Menu Select button directly below Prfl.
c. or to scroll through the menu selections.
d. Press the Menu Select button directly below Sel
to select the radio profile with the required
speaker routing or press the Menu Select button
directly below Exit to exit the screen without
making any changes.
The radio returns to the Home screen. The profile
name on the Home screen indicates the current
selected radio profile.