Table of Contents
Advertisement
data transfer without interrupting communication. The
upgrade pauses to give priorities to voice call, and
continues after the voice call ended.
Once a configuration upgrade is downloaded to your
radio, you can install new changes immediately or
delay changes to be installed on the radio when it is
being powered up.
Note: This feature must be preprogrammed by a
qualified radio technician. Check with your dealer or
system administrator for more information.
Responding to the Notification of Upgrade
1 The display shows Upgrade?.
2 Perform one of the following actions:
•
Press the Menu Select button below Acpt to
accept the request to upgrade immediately.
•
Press the Menu Select button below Dlay to
delay the request to upgrade.
•
Press the Menu Select button below Rej to
reject the request to upgrade.
One of the following scenarios occurs:
58
English
All manuals and user guides at all-guides.com
Voice Announcement
•
If you choose to accept, the display shows Upg Rx
In Prog to indicate the upgrade received is in
progress.
If the upgrade is successful, the display shows
Program done.
If the upgrade fails, the display shows Program
failed. The radio remains in current
configuration.
•
If you choose to delay, the radio prompts to
upgrade in the next power up of your radio.
•
If you choose to reject, the display shows Upg
Aborted. The radio continues to function with the
current configuration until it gets reprogrammed.
Note: If your radio has problems upgrading over-the-
air, consult a qualified technician for details.
This feature enables the radio to audibly indicate the
current feature mode, zone or channel the user has
just assigned. This audio indicator can be customized
per customer requirements. This is typically useful
when the user is in a difficult condition to read the
content shown on the display.
Advertisement
Table of Contents
