4. Ensure that the cell chassis mounting edges are sitting inside the edge of the groove rails,
and align the cell mounting holes (one on each side), with the corresponding rail receiver
holes, as shown in the Figure "
holes ".
Figure 10-11
Figure 10-12
Air Cooled 6SR5
Operating Instructions, 07/2018, A5E42736645A_AB
Proper alignment of power cell mounting with receiving
40 A - 140 A - proper alignment of power cell mounting with receiving holes
200 A - 260 A - proper alignment of power cell mounting with receiving holes
Maintenance
10.6 Remove and Replace
93