Siemens SINAMICS PERFECT HARMONY GH180 Operating Instructions Manual page 35

Properly Lift or Transport Equipment
1. Care and attention must be used to continuously monitor lift conditions while lifting. Use
2. Lifting and transport equipment must be sized appropriately (for forces to which they will
Ensure Transportation is in Accordance with Proper Procedures
The transportation unit/cabinet is heavy. The equipment may tip over if not transported
correctly, or, if an unpermitted method of transport is used.
● Ensure that the transportation unit/cabinet is transported by trained personnel only.
● Use only recommended methods of transport and lifting equipment.
● Always position the cabinet in the proper upright position.
● Never tip the cabinet.
Failure to obey these warnings may result in death or serious injury to personnel and material
damage to the drive.
Air Cooled 6SR5
Operating Instructions, 07/2018, A5E42736645A_AB
WARNING
low lifting heights and slow movements where possible when lifting or transporting
equipment.
be subjected).
WARNING
5.2 Packing and Transportation Requirements
Preparing for Use
33