Forward Calls In Specific Situations From Your Phone; Turn On Do Not Disturb From The Phone Screen - Cisco IP Conference Phone 8832 User Manual

Forward Calls in Specific Situations from Your Phone

Step 2
In Call Feature Settings area, choose a ringtone from the Default Ring drop-down list.
If you don't want to specify a ringtone for the phone line, choose No ring. Your phone doesn't ring when
receiving an incoming call.
Step 3 Click Submit All Changes.

Forward Calls in Specific Situations from Your Phone

You can set up your phone so that calls are forwarded during specific situations, such as when your phone is
busy.
Before you begin
Call forwarding must be enabled on your phone before you can forward your calls in specific situations.
Procedure
Step 1
Press Settings.
Step 2 Select User preferences > Call preferences.
Step 3
Select On for Call forwarding to enable call forwarding.
Step 4 Enter a phone number for each of the call forwarding services that you want to enable:
• Forward all number—Forwards all incoming calls to a target phone number.
• Forward busy number—Forwards all incoming calls to a target phone number when the primary line
• Forward no answer number—Forwards an incoming call that is not answered.
• Fwd no answer delay—Assigns a response delay time.
Step 5 Press Set.

Turn on Do Not Disturb from the Phone Screen

Set do not disturb (DND) to silence your phone and suppress incoming call notifications when you need to
avoid distractions. You can suppress all incoming call notifications or you can suppress a specific caller
notification.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
50
is active.
If your administrator disables the feature key synchronization (FKS) on your phone, you can enter the
value as number of seconds after which call needs to be forwarded.
If your administrator enables feature key synchronization (FKS) on your phone, you can enter the value
as number of rings after which call needs to be forwarded.
Settings