Install The Wired Expansion Microphones - Cisco IP Conference Phone 8832 User Manual

Install the Wired Expansion Microphones

Before you begin
Your administrator provides you with a 16-digit activation code in the form xxxx-xxxx-xxxx-xxxx.
Procedure
Step 1
Enter your activation code in the field that is provided on the Welcome screen. You don't need to input the
hyphen (-) character when entering the code.
Step 2 Press Continue.
The phone completes the onboarding process automatically.
Step 3 If an error message displays, enter the code again or contact your administrator for a new code.
Install the Wired Expansion Microphones
The conference phone supports an optional kit with two wired expansion microphones. You can extend the
microphones up to 7 feet (2.13m) from the phone. For best results, we recommend that the microphones be
placed at least 3 feet (0.91m) away from the phone.
Note
You must use either two wired microphones or two wireless microphones with the phone, but not a mixed
combination.
Procedure
Step 1 Plug the end of the microphone cable into the port on the side of the conference phone.
Step 2 Extend the microphone cable to the desired position.
The following figure shows installation of a wired expansion microphone.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
4
Your Phone