Table of Contents
Advertisement
Settings
Change the Ringtone
Use the following steps to set a ringtone for an incoming call.
1.
From your desk phone, press the Applications button
2.
Select User preferences > Ringtone > Ext (n) - Ring tone, where n= extension
number.
3.
Scroll through the list of ringtones and press Play to hear a sample.
4.
Press Select and then Set to save a selection.
Forward Calls in Specific Situations from Your Phone
You can set up your phone so that calls are forwarded during specific situations, such as when
your phone is busy. (Note: Call forwarding must be enabled on your phone before you can
forward your calls in specific situations.)
Use the following steps to forward calls in certain situations from your phone.
1.
From your desk phone, press the Applications button
2.
Select User preferences > Call preferences.
3.
Select On for Call forwarding to enable call forwarding.
4.
Enter a phone number for each of the call forwarding services that you want to
enable:
•
Forward all number—Forwards all incoming calls to a target phone number.
•
Forward busy number—Forwards all incoming calls to a target phone
number when the primary line is active.
•
Forward no answer number—Forwards an incoming call that is not
answered.
•
Fwd no answer delay—Assigns a response delay time.
If your administrator disables the feature key synchronization (FKS) on your phone, you can
enter the value as number of seconds after which call needs to be forwarded.
If your administrator enables feature key synchronization (FKS) on your phone, you can enter
the value as number of rings after which call needs to be forwarded.
5.
Press Set.
Cisco IP Phone 8841/8851 Multiplatform Phones User Guide
Settings
.
.
46
Hide quick links:
Advertisement
Table of Contents
