Wiring: Standard Configuration; Fig . 3: Standard Wiring Diagram - Curtis MultiMode 1214-8 Manual

Standard
Fig. 3
wiring diagram,
Curtis 1214-/15-/19-8
controller.
Curtis 1214-/15-/19-8 Manual
WIRING:
Standard Configuration
The configuration shown in Figure 3 is a typical arrangement for most applica-
tions. For walkie applications, the brake switch is typically activated by the tiller,
and a belly button switch provides emergency reverse. The emergency reverse
check feature (wiring shown by dotted line) is a factory option.
For rider applications, the brake switch is typically a seat switch or a foot
switch, and there is no emergency reverse.
SWITCHES
BRAKE/
KEYSWITCH FORWARD REVERSE
SEAT
POLARITY
PROTECTION
DIODE
POWER
FUSE
B+
MAIN
CONTACTOR
PRECHARGE RESISTOR
(250 Ω, 5 W)
B-
2 — INSTALLATION & WIRING
CONTACTORS
REV FWD MAIN
M-
B-
B- B-
S2
A
A1
SWITCHES
MODE EMERG.
SELECT REV
5kΩ–0
THROTTLE
(TYPICAL)
A2
B+
S1
A2
6