Gigaset E290HX User Manual page 14

Getting started
Changing the display language
You can change the display language, if the phone has been set to an incom-
prehensible language.
¤
Press the keys
(e.g.English) is displayed
¤
Select a different language:
required is selected on the display, e.g. Français
Registering a handset
A handset must be registered with a base or router. The registration process
depends on the base.
Registration must be initiated on the base and handset.
Both must be within 60 seconds of each other.
On the base / On the router
Gigaset base:
Other base/
router:
On the handset
¤
Settings
Registering... is shown on the display
PIN OK
Once registration is complete, the handset returns to idle mode.
De-registering a handset (dependent on base):
¤
Settings
Enter as required the base PIN
OK
Data protection
If the product is connected to the Internet via an IP base station or router,
it will automatically connect to the Gigaset support server sending regular
product specific information. This information will for example be used for
firmware updates or to provide internet services.
For more information regarding the stored data, please visit
www.gigaset.com
14
Press the control key
¤
Press and hold the Register/Paging key on the base for
about 3 seconds.
¤
Information on the registration procedure
Documentation for your base/router
OK Handset
OK Handset
Availability and operation of the functions
may differ on your telephone.
slowly in succession . . . the language set
OK
Enter as required the base
OK
OK . . . Confirm de-registration with
until the language
OK ( = selected)
Register Handset . . .
Deregister Handset