Connecting Video Sources; Connecting To Matrox Solios Ecl/Xcl-B - Matrox Solios Series Installation And Hardware Reference

Connecting video sources

Connecting to Matrox Solios eCL/XCL-B

The Matrox Solios eCL/XCL-B board has the following connectors on its bracket:
• One Camera Link-compliant video input connector. Used to receive video input,
timing, and synchronization signals and transmit/receive communication signals
between the video source and the frame grabber.
• External I/O connector 0 (DB-15 or DB-9). Used to transmit timing and
synchronization signals, and transmit/receive auxiliary signals.
Camera Link
Video Input
Connector #0
Use a standard Camera Link cable or a standard PoCL Camera Link cable to
interface with Camera Link Video input connector 0. You can purchase such a
cable from your video source manufacturer, 3M Interconnect Solutions for
Factory Automation, Intercon 1, or other third parties. Note that this cable is not
available from Matrox.
Connecting video sources
Auxiliary I/O
Connector #0
37